rejetting?
rejetting?
question!!!
i had the cylinder oversized to 67,50mm
do i have to change jets ?
i currently use standard for MK2
Main Jet 128
Pilot Jet 48
i had the cylinder oversized to 67,50mm
do i have to change jets ?
i currently use standard for MK2
Main Jet 128
Pilot Jet 48
-
madmanreevo
- Site Supporter
- Posts: 122
- Joined: 03 Oct 2004, 19:46
- Bike Owned: crm 2.2
- Location: warrington Cheshire UK
Re: rejetting?
i assume you would.
You will need to check the plug colour by doing a plug chop. for the main jet you need to take bike out for a run keep it at top revs for couple of mins then kill engine. now check you plug if its white it will need a bigger jet it needs to be a nice tan colour
You will need to check the plug colour by doing a plug chop. for the main jet you need to take bike out for a run keep it at top revs for couple of mins then kill engine. now check you plug if its white it will need a bigger jet it needs to be a nice tan colour