Wheel spacers/speedo
Wheel spacers/speedo
Hi all
Just about to replace the wheel bearings and seals on my CRM and noticed that the 2 spacers on the back and the 1 on the front are badly worn.
are these spacer still available?
Also the nylon gear for the speedo drive is worn, can this be bought on it's own or would i have to buy the whole assembly.
Oh! and one more thing! when i took the nylon gear out there was a steel ring, looks a bit like a cir-clip with the ends missing! is this right?
Any help would be much appreciated.
Cheers
Mark
Just about to replace the wheel bearings and seals on my CRM and noticed that the 2 spacers on the back and the 1 on the front are badly worn.
are these spacer still available?
Also the nylon gear for the speedo drive is worn, can this be bought on it's own or would i have to buy the whole assembly.
Oh! and one more thing! when i took the nylon gear out there was a steel ring, looks a bit like a cir-clip with the ends missing! is this right?
Any help would be much appreciated.
Cheers
Mark
-
helisupp
- NWAA Supporter
- Posts: 744
- Joined: 12 Apr 2012, 21:57
- Bike Owned: CRM AR (4)
- Location: Gloucester
Re: speedo
I am finding a few speedo drive parts in USA on ebay very cheap, I have just purchased an XR400 speedo drive in as new condition for £6 and £4 postage, not a bad buy.