poor running jreg crm

If a new member, introduce yourselves here, maybe even a pic of your bike.
User avatar
mr dirt lover
New kid on the block
New kid on the block
Posts: 9
Joined: 20 Feb 2012, 17:41
poor running jreg crm

Post by mr dirt lover »

Hi all this is my first post so please bear with me,

Right i hope that some one could please help before i go bonkers,
i have just bought a j reg crm and it did not run right,but i found a hole the choke channel
on the carb,sorted that BUT she goes good at mid range but if you go slow and wind her on she bogs
and seems to lack power at the top as well,just can't get my head round it.
any body got a idea.

thanks Steve.
back off road
Super Moderator
Super Moderator
Posts: 1027
Joined: 12 Sep 2010, 10:48
Bike Owned: KTM 200 exc
Location: Derbyshire/Notts border
Re: poor running jreg crm

Post by back off road »

whats the jetting ? sounds like a carb issue
Im thinking about a bike with more valves than a powervalve
User avatar
knackeredMk1
Super Moderator
Super Moderator
Posts: 4185
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: poor running jreg crm

Post by knackeredMk1 »

Also check the powervalve is moving.
User avatar
mr dirt lover
New kid on the block
New kid on the block
Posts: 9
Joined: 20 Feb 2012, 17:41
Re: poor running jreg crm

Post by mr dirt lover »

Hi and thanks for reply,
looks like running standard jets no numbers i think
power valve is working fine, got a fmf fatty on with fmf back box,when cold she works better,

thanks steve.
fallenmikethebike
NWAA Supporter
NWAA Supporter
Posts: 3520
Joined: 02 Dec 2007, 16:02
Bike Owned: MK3
Location: Mid Surrey
Re: poor running jreg crm

Post by fallenmikethebike »

:shock: Check the plug PDQ, you may be running ruinously lean.
2Ts have a habit exhibiting one trait that then turns out to be something else entirely.
Mike
VFORCE REEDS-MUGEN HEAD AND BARREL-WHITE POWER-ALL ON MY WISH LIST!!
User avatar
knackeredMk1
Super Moderator
Super Moderator
Posts: 4185
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: poor running jreg crm

Post by knackeredMk1 »

Quick check - does she run better with the choke on when she's bogging down.

I.e. click the choke on when she is bogging. If she comes immediately back then she's running lean. Only works of a second after you put the choke on though.
User avatar
SkidMark
Site Supporter
Site Supporter
Posts: 810
Joined: 19 Jan 2007, 18:38
Location: Uganda
Contact:
Re: poor running jreg crm

Post by SkidMark »

Am I right in saying that with a FMF system you need to rejet?!?
AR's rock!!!
TwinAir filter, Braided Brake Hoses, Swingarm/Shock bearings done!, Rear Shock overhauled and customised by G-Force, 14-44 Gearing, Exhaust decoked (fun with Caustic Soda!), DEP silencer.
User avatar
knackeredMk1
Super Moderator
Super Moderator
Posts: 4185
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: poor running jreg crm

Post by knackeredMk1 »

How can you say that you have standard jetting when you also say there is no numbers on jets :?: .

FMF doesn't usually need rejetting. When it does it means going leaner.
User avatar
mr dirt lover
New kid on the block
New kid on the block
Posts: 9
Joined: 20 Feb 2012, 17:41
Re: poor running jreg crm

Post by mr dirt lover »

Hi
when i took out the main jet Saturday it had no numbers on i think but to be
honest i didn't check properly as i was just cleaning the carb ,but will check
this weekend.
some one said it may be an air leek as it runs on when you shut the throttle
and sounds like it's pinking like a four stroke,
will try spraying some carb cleaner round flywheel and reed block on Saturday
and let you guy's know how i get on,but any other suggestions wold be very welcome.
Thanks Steve.
User avatar
knackeredMk1
Super Moderator
Super Moderator
Posts: 4185
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: poor running jreg crm

Post by knackeredMk1 »

Air leak is very possible. Running on and pinking are signs of running lean.

For some reason some Mk2s do make a sound very much like pinking but suffer no ill effects :? .

Another factor could be too high compression ratio for the petrol you are running. Very unlikely I know, but the bike I'm working on at the moment has had the head skimmed to within a thou of the engine's life :!: . You might think of emptying the tank and putting some super unleaded through if the problem continues.
User avatar
knackeredMk1
Super Moderator
Super Moderator
Posts: 4185
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: poor running jreg crm

Post by knackeredMk1 »

Going to move this post to 'Technical'.
User avatar
mr dirt lover
New kid on the block
New kid on the block
Posts: 9
Joined: 20 Feb 2012, 17:41
Re: poor running jreg crm

Post by mr dirt lover »

hi
as i'm a new member,when you say your going to move this to tecnical where is this.
thnanks steve
User avatar
knackeredMk1
Super Moderator
Super Moderator
Posts: 4185
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: poor running jreg crm

Post by knackeredMk1 »

In the section marked 'Technical' rather than 'New Members Intro'.
fallenmikethebike
NWAA Supporter
NWAA Supporter
Posts: 3520
Joined: 02 Dec 2007, 16:02
Bike Owned: MK3
Location: Mid Surrey
Re: poor running jreg crm

Post by fallenmikethebike »

:D Just South of Scunthorpe, :roll: , no not really, it's just another area of the forum, scroll down the home page to view, then click on.
Running lean sounds the most likely cause, which needs sorting PDQ.
Mike
VFORCE REEDS-MUGEN HEAD AND BARREL-WHITE POWER-ALL ON MY WISH LIST!!
fallenmikethebike
NWAA Supporter
NWAA Supporter
Posts: 3520
Joined: 02 Dec 2007, 16:02
Bike Owned: MK3
Location: Mid Surrey
Re: poor running jreg crm

Post by fallenmikethebike »

:D Bugger, you beat me to it. :roll:
Mike
VFORCE REEDS-MUGEN HEAD AND BARREL-WHITE POWER-ALL ON MY WISH LIST!!

Post Reply