Page 1 of 1

Power

Posted: 30 Apr 2006, 21:53
by rad205k
ive just bought a 1989 crm 250R it runs great and is in very good condition, but its seems restricted or something. It gets to 70mph and that is it won't go now more but the engine doesnt sound like its over revving at all. It doesn't seem to hit a powerband either though Ive checked the r.c vavle and thats all lined up correctly? please help thanks. rad

power

Posted: 01 May 2006, 19:41
by simon foster
Look in the Airbox, there is a sleeve in there that restricts airflow into the engine, remove this, it should rev better

Simon

power

Posted: 01 May 2006, 22:59
by mikey11000
hi,did you buy it of ebay. Also you say the rc valve is lined up ok.you need to check this properly with engine running,check it moves when you rev the bike and that its not just flapping around.it sounds to me as though the valve isn,t working as it should.if not check cables are ok

Posted: 02 May 2006, 18:12
by rad205k
thanks ,really appreciated I checked the r.c valve and it turned out not to be working at all so I had all to bits and it turned out it wasnt properly plugged, now it flies, though I lined the marks up again went for a ride turned it off and the marks were out of line

Posted: 02 May 2006, 18:53
by mikey11000
glad you got it sorted,its best to check the marks with the bike warmed up and on tick over as it may drop drop when its switched of