Nice stoppie mate 8) . But as everybody know's, 2\" extra length can make quite a difference.

very impressive ,havent done one of those since Andy Ruffle did BMX Beat on saturday mornings.perhaps we should do a stunt photo section.

Back to your wheels...are you using the speedo drive off the cagiva and/or its spacers? I know you said you would need some spacers making up and was wondering if these where instead of the origionals.

I am interested in using some of these wheels for mine as I am going to give hilclimbing a go (twisty tarmac type) and could do with a cheap wheel conversion so i can use sticky tires

Back to your wheels...are you using the speedo drive off the cagiva and/or its spacers? I know you said you would need some spacers making up and was wondering if these where instead of the origionals.

I am interested in using some of these wheels for mine as I am going to give hilclimbing a go (twisty tarmac type) and could do with a cheap wheel conversion so i can use sticky tires

won a set of cagiva wheels on ebay today (3 spoke) so I will let you know how i get on with em

it should turn out a bit like this one .......

Think this might be the same one completed. 8)

http://193.116.26.75/uploaded/white_crm_sm.jpg

Is that the dogs or what 8)

I got the same pipe . Thats where the similarity ends .
Good luck Moto. Keep us informed how you get on.
cheers. Gwyn.

Yep, its one fine lookin moto........mine will be more ding than bling tho as I still want to use it off road

the speedo drive off the cagiva would fit but would run backwards. yes all new spaces needed but may be able to use crm speedo drive with a bit of clever lathe work.when it's done I'll post all the measurements and pictures.to stabilise front fmx650 hugger mudgaurd or other i will use fork mounted universal headlight brackets £15/30 ,M+P motorcycles.

Doh.....I supose it would run backwards at least one of us is awake

Thanks Slasher