How much power

Post Reply
User avatar
warloks
Visitor
Visitor
Reactions:
Posts: 55
Joined: 15 Nov 2015, 20:56
How much power

Post by warloks » 20 Nov 2015, 20:34

Hi everyone I took my crm out today just a spin around the block and I was a little disappointed by the way it went I was expecting 1st gear wheelies but it didn't deliver the goods it's on 14k miles is it due a rebuild I own 3 other hondas.a blade,blackbird and a cbr600 so that's all I can compare it to how do you really know when the engine is tired

User avatar
jompy
Forum Ghost
Forum Ghost
Reactions:
Posts: 493
Joined: 03 Jul 2012, 19:55
Bike Owned: MK2
Location: Derby
Re: How much power

Post by jompy » 20 Nov 2015, 21:28

They only kick out 40hp and I'm sure that's at the crank , I used to be able to wheelie mine in 2nd but it was geared down and there was a knack to it , roll along in second at just over walking pace , chop the throttle and then give it a fist full !
Remember this isn't a CR it's a trail bike it's more about steady riding & torque ;)

User avatar
warloks
Visitor
Visitor
Reactions:
Posts: 55
Joined: 15 Nov 2015, 20:56
Re: How much power

Post by warloks » 20 Nov 2015, 21:54

Im going to give it a good run on sunday maybe the run around the block didnt get it warm enough

User avatar
knackeredMk1
Super Moderator
Super Moderator
Reactions:
Posts: 4185
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: How much power

Post by knackeredMk1 » 20 Nov 2015, 23:39

Stock they put out slightly less than 30bhp at the wheel. Acceleration has a lot to do with gearing and tyres. Also affected by chain and sprockets as well of engine condition. To check the basic engine condition you have to at least take the cylinder head off and also look up exhaust port. You are looking for marks on the piston and bore and wear on the bore.

User avatar
fishtail
Site Supporter
Site Supporter
Reactions:
Posts: 1048
Joined: 13 Jan 2012, 11:29
Bike Owned: CRM 250 Mk3
Location: derby/leicester border.
Re: How much power

Post by fishtail » 21 Nov 2015, 01:23

i stuck 48 teeth on the back...that should help... 'accidental' wheelies pulling off traffic lights are common..

few revs drop clutch. up she goes.

remember the back brake hehe
1996 CRM 250 "Mk 3" FMF pipe .... - the other 'un is a 98 hornet 600 - Sai Kung Hong Kong

User avatar
mikeelwb
Regular Visitor
Regular Visitor
Reactions:
Posts: 120
Joined: 10 Sep 2010, 11:56
Re: How much power

Post by mikeelwb » 21 Nov 2015, 04:06

Im on 14/45 sprockets and from the lights opening it up properly im up on the back wheel and still up in 2nd puts a huge smile on my face every time lol altho my previous crm did it down gearing to overtake a car only for the police to see it and chase me and pull me over then say its classed as anti social behaviour on a bike and they can sieze and crush it but i heard that a you wont get in trouble if its a wheelie under 3 seconds so ive heard

User avatar
jompy
Forum Ghost
Forum Ghost
Reactions:
Posts: 493
Joined: 03 Jul 2012, 19:55
Bike Owned: MK2
Location: Derby
Re: How much power

Post by jompy » 21 Nov 2015, 10:23

That copper in the in marked Audi didn't like me going past him on the back wheel of the R1 !
Couldn't explain to him that he took his foot off the gas when he was just past the push bike as I was rolling on the throttle so I had to chop the throttle for a second then opened it up , problem was I was in a low gear , more or less commited to the overtake on a clear road but a bend coming up , obviously didn't realize he was a copper as all the windows were a dark tint , the front started to lift and I just thought f**K it ! Lists of humble pie 3 points & a £100 fine later doh!
This forum needs a like button for posts

gregorious77
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 615
Joined: 03 Jan 2014, 20:37
Re: How much power

Post by gregorious77 » 23 Nov 2015, 21:42

Mine wheelies 1st, 2nd, 3rd and 4th with some clutch 13/52 gearing though ;)
Vid of me giving it some beans on track.


Post Reply