SO where do i start ?

Post by **back off road** » 30 May 2011, 23:53

Guess what

found more bits to do as its raining and the brother in law has gone away and the mrs is at work

carb heater pipes disconnected

re jetting may have been in vain as ive found the 2 stroke pipe from the pump to the carb is split

new pipe made and fitted but cant try it as the nasty DEP expansion chamber is on the floor and i dont pick the shiney replacement up off gary until tomorrow

exhaust to fit then plug chop time again bet the neighbours arnt going to be happy

Post by **twistednuts** » 31 May 2011, 20:19

Do you do plug chops with the bike on the stand?

I thought you had to do it whilst ridin. Guess it dont matter does it.

Post by **back off road** » 31 May 2011, 22:23

i always do plug chops on the road , dont no if it would work the same or not on the stand ?

Post by **twistednuts** » 31 May 2011, 23:13

Sorry back off, with you sayin annoyin the neighbours - i thought you meant sittin there revvin its tits off

Thinkin about it, i dont think it would be accurate on the stand. The air flow is totally different whilst on the move

Post by **knackeredMk1** » 01 Jun 2011, 09:11

You have to do it on the road. Get as long a run at whatever throttle opening you are testing with the bike acceletating. Then turn off ignition and stop. Don't coast/slow down with the engine running if you can avoid it.

Post by **back off road** » 01 Jun 2011, 20:27

thats why it will annoy the neighbours my road is about a mile long and straight

Post by **knackeredMk1** » 01 Jun 2011, 22:05

Is this the driveway to your stately home

.

Post by **back off road** » 02 Jun 2011, 00:05

ok knack

,the road i live on ,not my personal road

SO where do i start ?

Re: SO where do i start ?

Re: SO where do i start ?

Re: SO where do i start ?

Re: SO where do i start ?

Re: SO where do i start ?

Re: SO where do i start ?

Re: SO where do i start ?

Re: SO where do i start ?